The injection molding mold is subjected to the combined action of force and heat when working, and its working conditions are different from that of cold punching molds, and the force received is the pressure when the mold is closed.

Injection molds generally need to work in a high temperature environment of 150 degrees Celsius to 200 degrees Celsius when manufacturing plastic products in an injection molding machine.

The injection mold debugging must be prepared according to the mold debugging notice issued by the external cooperation department or the production department. The first step is the review of the drawings.

In the heat treatment process, precision injection molds are often deformed. In order to prevent this bad phenomenon, as long as the deformation laws are grasped, the causes are analyzed, and different methods are used to prevent mold deformations.

Rapid mold temperature injection molding technology is also called high-gloss injection molding technology. It uses a dynamic mold temperature control method, which divides the injection mold temperature control into four stages: heating, high temperature holding, cooling, and low temperature holding, and in a short time Quickly realize the above 4 temperature change processes.

The molten plastic particles are formed into injection molded products during the injection molding process. This process is still relatively complicated. It requires the injection molding engineer to pay attention to some injection molding process parameters. The quality requirements of the final injection molded product have been guaranteed. Then the injection molding process needs to pay attention to those processes The parameters.

The molten plastic particles are formed into injection molded parts during the injection molding process. This process is still relatively complicated. This requires attention to the process parameters of some injection molded parts. The quality requirements of the injection molded parts have been guaranteed. Then the plastic parts processing technology needs to pay attention to those process parameters Woolen cloth.